VN025 - MQB 5C All Keys Lost & Module Replacement For VAG

Description

VN025 - MQB 5C All Keys Lost & Module Replacement For VAG

It is the world’s first solution for All Keys Lost (AKL) and spare key programming for MQB Immo 5C vehicles without requiring synchro bytes or dealer-level information to prepare a dealer key.

The functionality supports vehicles where the immobiliser data is integrated into the instrument cluster and works with both VDO dashboards equipped with CryptoCore RH850 MCUs.

VN025 also enables supported ECU and TCU replacement procedures for MQB Immo 5C vehicles.

Functionalities:

• All Keys Lost key programming for MQB Immo 5C vehicles
• Spare key programming
• Dealer key preparation without synchro bytes
• Support for VDO instrument clusters with CryptoCore RH850 MCUs
• Programming with virgin aftermarket keys
• Programming with supported used OEM keys
• ECU replacement support
• TCU replacement support

Key Programming

VN025 allows key programming for supported MQB Immo 5C vehicles equipped with HiTag PRO keys, including situations where no working key is available.

No previously saved synchronisation data or dealer-level information is required to prepare the dealer key.

Compatible Keys

• Virgin aftermarket keys
• Supported used OEM keys
• *ZN085 RH850/V850 Programmer and CB503 are required when working with supported OEM keys.

ECU and TCU Replacement

VN025 also provides the immobiliser data required for supported ECU and TCU replacement procedures on MQB Immo 5C vehicles. Supported modules include:

• DCM6.2
• Simos 18.x
• Bosch ECUs up to approximately 2021
• DQ381
• DQ200
• DQ250
• DQ500
• Other supported non-CryptoCore ECU and TCU modules
• *The VN002 Parts Adaptation license is required to complete ECU and TCU adaptation procedures.

Compatibility

VN025 supports MQB Immo 5C vehicles from the Volkswagen Group, including Volkswagen, Audi, Škoda and SEAT models based on the MQB49 platform.

Typical supported vehicles are produced approximately between 2019 and 2026 and feature:

• HiTag PRO keys
• Immobiliser data integrated into the instrument cluster
• VDO or JCI instrument clusters with CryptoCore RH850 MCUs

Required Hardware & Software:

• AVDI ABRITES Vehicle Diagnostics Interface
• ZN085 ABRITES RH850/V850 Programmer
• ZN103 PROTAG Key and Transponder Programmer
• ZN151 DS Box (for reading immobiliser data from ECU and TCU modules)
• (AMS) Active Annual Subscription

Additional Hardware Depending on the Procedure

• VN002 Parts Adaptation License – Required for ECU and TCU replacement procedures
• CB503 – Required when using OEM keys
• CB032 – Required for DCM6.2 ECU modules
• CB012 – Required for connection to internal CAN (SFD-secured Gateway modules