You will need to use the Programmer on the bench and solder it to the module, e.g. BCM, Virtual cockpit/Instrument Cluster, Handsfree Module, to connect. No trace cutting or pin lifting is required.

Functionalities:

• Reading and writing locked V850 processors.
• Reading locked RH850 processors.

The acquired Immo data allows:

• Mileage calibration.
• Cluster exchange.
• Key programming.

Once you read the data from the module, you will be able to perform numerous procedures. You will be able to read Component Security bytes, Component Protection bytes, vehicle identification numbers, MAC addresses, learn key IDs for VAG vehicles, as well as PIN codes for Renault vehicles.

Supported V850/RH850 Processors:

• VDO MQB Analogue V850 70F3526.
• VDO MQB Virtual Cockpit V850 70F3526.
• VDO MQB Analogue V850 70F3525.
• VDO MQB Analogue V850 70F3537
• JCI MQB Analogue V850 70F3529.
• VDO MQB Virtual RH850 R7F701401 (with Megamos-AES keys).
• Renault HFM RH850.
• Renault BCM RH850.
• And many more to come.

Please note: 

• Mileage recalibration procedures for VAG vehicles with V850 processors require a VN007 license.
• Key programming procedures for VAG vehicles with V850 processors require a VN009 license.
• Key programming procedures for VAG vehicles with RH850 processors require a VN021 license.
• All Keys Lost key programming procedures for Renault vehicles equipped with an RFH/BCM module require the RR026 license.
• An AVDI with active AMS is required to complete all these procedures.